Georgia HVAC Load Calculations and Design Support

Residential Manual J, S and D. Light commercial calculations using ASHRAE RTS.

Send your plans, project location, and permit requirements. ProCalcs will review the calculation services, deliverables, and timing to quote.

The Two Problems Georgia Professionals Face Every Day

❌ Slow Response Times

You email for an HVAC load calculation quote. No response for 3 days. You call. Voicemail. You call back. Still voicemail. Your project deadline is approaching and you're STUCK waiting for someone to just answer you.

βœ“ Start with your plans and target date. We confirm quote details and scheduling after reviewing the project information.

❌ Failed Permit Submissions

You paid for Manual J calculations. You submitted them to the building department. They send them back: wrong window values, wrong insulation specs, doesn't match your plans. Now you're delayed, your client is angry, and your reputation takes a hit.

βœ“ Send current building specifications and written reviewer comments so the calculations can be coordinated with the proposed work. Permit approval remains with the reviewing authority.

Clear Inputs. Documented Calculations. Coordinated Project Scope.

Plan changes, equipment choices, and permit requirements affect the documents you need. Confirm the scope before ordering, and tell us about your deadline.

"Why Do You Ask So Many Questions About My Project?"

Accurate Georgia HVAC calculations start with the building and equipment information for your project.

Window ratings, insulation, orientation, room dimensions, and outdoor design conditions affect heating and cooling loads. Send current plans and any written permit requirements so the calculation scope can be coordinated with the proposed work.

We ask about:
  • Actual window SHGC and U-factors, plus window sizes and orientation.
  • Insulation type and R-values for the walls, roof, and floors in scope.
  • The products you plan to install, including proposed equipment model numbers when available.
  • Your project address and local requirements, so climate zone and design conditions can be checked for the location.

Flag missing information before the design is finalized.

Building or equipment changes may require revised calculations. Providing current specifications helps reduce avoidable revisions.

ProCalcs supports architects, builders, HVAC contractors, and homeowners throughout Georgia.

For projects in Atlanta, Savannah, Augusta, Columbus, and other Georgia communities, send the project location, scope, and plans for review. Permit acceptance depends on the applicable requirements and the reviewing authority.

Georgia state outline map

Georgia-Specific HVAC Calculation Expertise

Energy Code and Effective Edition

Georgia’s Department of Community Affairs currently lists the 2015 IECC with Georgia supplements and amendments as the mandatory energy code. Its current construction-code list separately identifies the 2024 IRC with Georgia amendments.

The editions for building, residential, mechanical, and energy codes are not necessarily the same. Do not infer an energy-code edition from the year on another construction code. Confirm the applicable amendments and permit requirements.

Location-Specific Design Inputs

The energy-code climate zone and outdoor design temperatures serve different purposes. Verify both for the project location.

  • Project address, county, and building use.
  • Location-specific heating and cooling design conditions.
  • Orientation, glazing, insulation, and room dimensions.

Local exposure and building details affect the calculation. A statewide rule of thumb does not replace project-specific inputs.

Residential and Light Commercial Scope

Residential services include Manual J load calculations, Manual S equipment selection, and Manual D duct design when included in the quote.

Commercial cooling-load calculations use ASHRAE Radiant Time Series (RTS). Equipment selection, duct design, energy documentation, and other deliverables depend on the agreed scope.

Local Review and Documentation

The Georgia Department of Community Affairs publishes the state minimum standard codes and amendments. Confirm local administrative procedures, permit documents, and inspections with the enforcing jurisdiction.

Send the permit checklist or reviewer comments. Confirm the accepted energy-compliance path, applicable amendments, and documentation before ordering. Calculation documents do not guarantee permit approval.

Code reference reviewed November 7, 2026: Georgia Department of Community Affairs, Current State Minimum Codes for Construction and Mandatory and Permissive State Codes. Confirm current requirements with the applicable authority.

Light Commercial HVAC Design in Georgia

Light Commercial Cooling Loads, Calculated the ASHRAE Way

For Georgia light commercial projects we use the Radiant Time Series (RTS) method from the ASHRAE Handbook of Fundamentals. Instead of a single design-day snapshot, RTS models how heat enters your building hour by hour, and how walls, floors and furniture delay when that heat becomes cooling load. You get a true peak hour, and equipment sized to it instead of oversized.

  1. 01Hour-by-hour cooling loads across the design day, with the true peak hour and peak month
  2. 02Thermal mass and time-delayed radiant heat gain captured, a strong fit for Georgia's brick and block construction
  3. 03Solar gain through large glazing modeled properly for Georgia's long humid summers and strong sun
  4. 04Accepted on projects where ASHRAE-based calculations are specified
  5. 05Commercial equipment selection, duct design, and air-distribution support when included in the agreed scope

Georgia light commercial projects that fit RTS

  • Small offices
  • Retail spaces
  • Restaurants
  • Mixed-use buildings
  • Buildings with large glazing
  • Heavy brick and block construction
  • Occupancy that varies by hour
  • Specs calling for ASHRAE calculations
99occupants or fewer
15 tonsper unit, maximum

Send occupancy, equipment capacity, building use, and any sealing requirements before ordering. Projects outside the displayed limits require a separate scope review; eligibility is not assumed.

GET YOUR RTS QUOTE See how the RTS method works β†’ Commercial scope and scheduling are confirmed after project review.

Our Georgia HVAC Calculation Services

Manual J Load Calculations

Accurate heating and cooling load calculations for Georgia's hot-humid, mixed-humid, and mountain climate zones

Learn More β†’

Manual D Duct Design

Proper duct sizing for Georgia's high humidity and extended cooling season demands

Learn More β†’

Manual S Equipment Selection

Residential equipment selection using calculated loads, proposed equipment models, and manufacturer performance data

Learn More β†’

Commercial Load Calculations (ASHRAE RTS)

Light commercial cooling-load calculations using ASHRAE RTS. If your specification mentions Manual N, send the written requirement for scope clarification.

Learn More β†’

Energy Calculations

Georgia energy code compliance and REScheck / COMcheck documentation

Learn More β†’

For Architects

Accurate HVAC calculations for code compliance and plan reviews across Georgia

Learn More β†’

For Builders

Fast, accurate calcs that keep your Georgia construction projects on schedule

Learn More β†’

For HVAC Contractors

Professional calculations that help you sell and install better HVAC systems

Learn More β†’

Find Your County Building Department

Enter your Georgia zip code to find your county's building department and specific HVAC requirements.

Need help understanding your county's specific requirements?

Contact Us for Assistance

We Serve All Georgia Counties for HVAC Calculations

ProCalcs provides professional HVAC load calculations throughout every one of Georgia's 159 counties β€” the most of any state east of the Mississippi. Whether you're in the Atlanta metro, coastal Savannah, central Georgia, or the Blue Ridge Mountains, we deliver the same fast, accurate, code-compliant service. Below are quick links to building departments in Georgia's most active construction counties:

Don't see your county? Contact us and we'll help you find the information you need.

Ready to Get Started with Your Georgia HVAC Load Calculations?

Send your current plans, project address, proposed equipment information, and any permit comments. Typical residential turnaround is 3–5 business days, subject to complete information, scope, and scheduling. Commercial timing is confirmed after review.

Serving Georgia architects, builders, HVAC contractors, and homeowners
Fast. Accurate. Professional. Every single time.

Common Questions About Georgia HVAC Load Calculations